PD-Switch
Combining flexible copper and fiber interface options, including media conversion, along with port and packet-based traffic prioritization, PD-Switch's rich functionality turns Power over Ethernet (PoE) into extended network range.
Today's network operators benefit from implementing Power over Ethernet (PoE) technology. No electrical wiring
is needed, allowing flexibility in placement and design of network solutions such as Wireless Access Points and
IP cameras
While typical PoE switches are designed to deliver power to remote network devices, the multi-port PD-Switch from IMC Networks accepts PoE, acting as an 802.3af compliant Powered Device (PD). With the PD-Switch, operators can now extend the 100 meter range of their copper-based networks an additional 100 meters, without costly and complex electrical rewiring.
With multiple port configurations, the PD-Switch provides a variety of options while increasing port density.
PD-Switches come equipped with a "PD" RJ-45 port and either:
- Four 10/100Base-T RJ-45 data ports
- Three 10/100Base-T RJ-45 data ports and one SFP port or,
- Two 10/100Base-T RJ-45 data ports and one standard (1x9) fiber port. All fiber ports are fixed at
100 Mbps.
The fiber port and SFP versions offer media conversion between copper and multi-mode or single-mode fiber connections.
Each PD-Switch also comes equipped with a low latency RJ-45 port for high-priority network traffic. The PD-Switch also supports IP packet prioritization, giving a higher priority to any traffic on any port that is flagged for higher priority. All RJ-45 ports also feature Auto-Cross and Auto Negotiation. The fiber-optic models feature Far End Fault, providing notification of Far End Link Loss on the fiber port.
IMC Networks offers a full range of SFPs. For more information, go to the SFP product page.
|
Application Diagram
In the following example, PD-Switches have been connected to a central (PoE) PSE-Switch, extending the range of the network and increasing port density. One PD-Switch utililzes the four standard RJ-45 ports to connect to the network, while the other two use the fiber and SFP configurations to extend the network beyond the 200 m range.
Features and Specifications
- Each version features one IEEE 802.3af compliant RJ-45 Powered Device (PD) port,
and one high priority RJ-45 port - Small, rugged design
- Maximum 1,916 Packet Size
- Includes diagnostic LEDs
- Broadcast Storm Protection
- Auto Negotiation supported on all copper ports
- Supports Half and Full-Duplex operation
- Port-based RFC-2474 and RFC-2475 DiffServ/ToS
- Full wire speed on all egress ports.
- Distances: 100 meters on 10/100 twisted pair
- Automatic MDI-II/MDI-X (Auto-Cross) on all copper ports for plug-and-play connectivity
Three Configuration Options
- All Copper Option (10/100Base-T)
- One PD port, one priority port and three standard RJ-45 ports
- Fiber Option 1: 1x9 Port (100Base-FX)
- One standard 1x9 fiber port
- Connectors: SC or ST
- Multi-Mode or Single-Mode Available
- 50/125µm or 62.5/125µm multi-mode (up to 2 km)
- 9/125µm single-mode (up to 100 km)
- Single-Strand Fiber available (up to 60 km)
- Features one RJ-45 PD port plus two standard RJ-45 ports
- Fiber Option 2: SFP Port (SFP Dependent)
- One standard SFP fiber port
- Supports MSA-compliant SFPs
- Features one RJ-45 PD port plus three standard RJ-45 ports
Physical:
- Connectors: RJ-45 and SC or ST
Standards Compliance:
- IEEE 802.3x Ethernet
Regulatory Approvals:
- FCC Class A
- CE
Operating Temp:
+32° to +122° F (0° to +50° C); 5% to 95% (non-condensing), 0 – 10,000 ft. altitude
Storage Temp:
-13° to +158° F (-25° to +70° C); 5% to 95% (non-condensing), 0 – 10,000 ft. altitude
Dimensions:
1.55”H x 4.75”L x 7.31”D 3.94cm H x 12.07cm L x 18.57cm D)
Shipping Weight:
1.8 lbs (0.82 kg)
For more information about RoHS and for RoHS product availability, please contact sales@imcnetworks.com
PD-Switch Documents
Certification
- Declaration of Conformity: PD-Switch
Post Date: 5/2008
Data Sheet
- PD-Switch
Post Date: 4/2009
Manuals and Installation Guides
- Installation Guide for PD-Switch
Revision: A3 - Post Date: 5/2008
Standard
| SKU | Description | Power Budget | Distance |
| 852-16440 | PD-Switch, TX/5 | N/A | 100 m |
| 852-16441 | PD-Switch, TX/4 + SFP | N/A | Various |
| 852-16442 | PD-Switch, TX/3 + SX-MM850-ST | 2 km | |
| 852-16443 | PD-Switch, TX/3 + SX-MM850-SC | 2 km | |
| 852-16444 | PD-Switch, TX/3 + FX-MM1300-ST | 2 km | |
| 852-16445 | PD-Switch, TX/3 + FX-MM1300-SC | 2 km | |
| 852-16446 | PD-Switch, TX/3 + FX-SM1310/PLUS-ST | 40 km | |
| 852-16447 | PD-Switch, TX/3 + FX-SM1310/PLUS-SC | 40 km | |
| 852-16448 | PD-Switch, TX/3 + FX-SM1310/LONG-ST | 80 km | |
| 852-16449 | PD-Switch, TX/3 + FX-SM1310/LONG-SC | 80 km | |
| 852-16450 | PD-Switch, TX/3 + FX-SM1550/LONG-SC | 80 km |
Single-Strand Fiber
| SKU | Description | Power Budget | Distance |
| 852-16470 | PD-Switch, TX/3 + SSFX-SM1310-SC (1310xmt/1550rcv) | 20 km | |
| 852-16471 | PD-Switch, TX/3 + SSFX-SM1550-SC (1550xmt/1310rcv) | 20 km | |
| 852-16472 | PD-Switch, TX/3 + SSFX-SM1310/PLUS-SC (1310xmt/1550rcv) | 40 km | |
| 852-16473 | PD-Switch, TX/3 + SSFX-SM1550/PLUS-SC (1550xmt/1310rcv) | 40 km | |
| 852-16474 | PD-Switch, TX/3 + SSFX-SM1310/LONG-SC (1310xmt/1550rcv) | 60 km | |
| 852-16475 | PD-Switch, TX/3 + SSFX-SM1550/LONG-SC (1550xmt/1310rcv) | 60 km |