Product Data Sheets
Please browse through the list of available product data sheets, and click on the link to open and download them. You need to have Adobe Acrobat reader installed.
AccessConverter
AccessConverter is a multi-port fiber media converter, aggregating three 10/100 Ethernet devices into a 100Base-FX uplink. While typical Media Converters perform a conversion between one twisted pair interface and one fiber optic interface, the new AccessConverter offers three 10/100 ports that will connect to any 10Mbps or 100Mbps device. Having three ports instead of one will dramatically increase the application flexibility and reduce cost by 60%...
AccessEtherLinX
Giga-MiniMc
Media conversion is the most cost-effective solution for extending the productive life of legacy wiring plants and equipment while allowing implementation of new technologies. Media conversion's greatest benefits are flexibility and cost savings. However, with networks constantly growing and projects increasing in scope, even reasonably-priced media converters can tack on a substantial sum to networking costs. Space constraints can also be an issue when hundreds of conversions are required...
MiniMc-Gigabit
MiniMc-Gigabit converts 1000Base-T twisted pair to 1000Base-SX or 1000Base-LX fiber optics for distances up to 70 Km.
Measuring less than 3.5 inches deep and 2 inches wide, IMC Networks’ MiniMc is the smallest media converter in the industry which has both data connections on the same side of the unit, and MiniMc is a fraction of the cost of other alternatives. MiniMc is proudly made in the USA...
IE-Giga-MiniMc
Smart network operators know that media conversion is the most cost-effective and flexible solution for adding today's advanced networking hardware to legacy wiring plants and equipment. But even reasonably-priced media converters can tack on a substantial sum to networking costs. And space constraints can also be an issue when hundreds of conversions are required. Adding to this complexity is the growing trend of installing network gear in extreme temperature environments...
IE-iMcV-2xLIM
IE-iMcV-ModeConverter
IE-iMcV-MultiWay
IE-iMcV-MuxDemux/4
IE-MiniFiberLinX-II
Transparent LAN service providers require remote CPE management capabilities as well as the ability to isolate management traffic and customer data. Designed for service providers and campus network administrators, the compact IE-MiniFiberLinX-II provisions point-to-point fiber optic connections and provides a unique management tool to monitor the entire link between two locations. IE-MiniFiberLinX-II CPE for fiber optic networks allows service providers to deliver "triple play" voice, video and data services to customer premises...
IE-PowerTray/18-AC
IE-PowerTray/18 series provides a high-density mounting and powering for MiniMc 10/100 and Gigabit MiniMc Media Converters. IE-PowerTray/18 can be rack-mounted to a standard 19" equipment rack, and features an internal AC or DC power supply. Designed for extended temperature operation, the IE-PowerTray/18 is ideal for extreme environments...
IE-MiniMc
As one of the fast-growing IMC Networks brands, the MiniMc series now includes an Industrial Ethernet model that will withstand even the toughest environments...
IE-ModeConverter
Mode converters allow network operators to incorporate multiple fiber types within a network. Single and multi-mode fiber, and single strand fiber and CWDM wavelengths can be mixed and matched as needed. Cost savings are realized because a mode converter is less expensive than replacing an optical blade on network equipment. A typical application of a mode converter is a conversion between single-mode and multi-mode fiber, allowing easy network extension to remote locations...
IE-MultiWay
IE-Power/5V
SFP, IE-SFP, SFP+ & XFP Transceivers
SFPs are compact transceivers which function as modular connectors. Available for copper (RJ-45) and for all common fiber modes, wavelengths and data rates, SFPs allow network operators to connect different interface types to the same network equipment, via an SFP port. The cost of cable upgrades is greatly reduced - preserving the investment in costly networking equipment, for the price of a relatively inexpensive SFP. More and more network equipment is being designed with SFP ports, to take advantage of this flexibility, and to take the uncertainty and guesswork out of expensive equipment purchases...
SFP, IE-SFP, SFP+ & XFP Transceivers
SFPs are compact transceivers which function as modular connectors. Available for copper (RJ-45) and for all common fiber modes, wavelengths and data rates, SFPs allow network operators to connect different interface types to the same network equipment, via an SFP port. The cost of cable upgrades is greatly reduced - preserving the investment in costly networking equipment, for the price of a relatively inexpensive SFP. More and more network equipment is being designed with SFP ports, to take advantage of this flexibility, and to take the uncertainty and guesswork out of expensive equipment purchases...
iMcV-10G-Converter XFP/XFP
iMcV-DS3/E3/STS Repeater
The iMcV-DS3/E3/STS-1 coax-to-fiber repeater provides a transparent conversion from coaxial circuits to fiber optics, dramatically increasing the signal range. It is ideal for extending transmission distances of high-speed coaxial circuits over multi-mode, single-mode and single-strand fiber optic cabling...
iMcV-DS3/E3-LineTerm
iMcV-DS3/E3-LineTerm is an SNMP manageable module that converts standard thin coax signals (DS3, E3, STS-1) to a single-mode or multi-mode fiber signal, extending the distance of data transmissions over MAN access networks up to 80 km. The iMcV-DS3/E3/STS1-LineTerm converter is perfect for service providers and enterprise campus networks utilizing DS3/E3/STS1 coaxial circuits...
iMcV-FiberLinX-II
The FiberLinX-II solution connects a host/remote network over fiber optics. Building on the success of the original FiberLinX solution, the FiberLinX-II combines media conversion with an advanced-feature set for network management and troubleshooting, including Extra-Tagging and EtherType control functionality. With the FiberLinX-II, administrators can observe the end-points, and the fiber link between them, as single management entities and not as separate elements. Host management traffic is not visible to the remote or customer network nor is access to the customer network required, guaranteeing end-to-end data integrity...
iMcV-Giga-FiberLinX-II
Introduced in 2005, the iMcV-Giga-FiberLinX-II system is field proven in Fiber-to-the-Premises applications and deployed by CATV, MSO, telecommunications carriers and Metro Ethernet Operators worldwide. iMcV-Giga-FiberLinX-II enables quick provisioning of high-speed Internet, Ethernet Private Line and transparent LAN services to business customers of all sizes...
iMcV-MediaLinX & IE-iMcV-MediaLinX
Converting both media and speed, the iMcV-MediaLinX series is the most flexible in the industry, enabling network administrators to connect 10 Mbps and 100 Mbps twisted pair network segments to 100Base-FX duplex or single-strand fiber optic cabling...
iMcV-Giga-MediaLinX
Modules in the iMcV-Giga-MediaLinX series provide a switching media conversion between 10/100/1000 Mbps twisted pair networks and 1000 Mbps multi-mode or single-mode fiber. Giga-MediaLinX modules are the most versatile in the industry, featuring seamless auto-negotiation between three Ethernet speeds on the UTP port, and the ability to force speed and duplex via software or hardware settings...
iMcV-S2MM, M2MM, S2SM
The protocol-independent, physical layer fiber mode converters allow you to easily make the connection between two dissimilar fiber types or wavelengths – for example, to extend multi-mode switch interfaces over single-mode fiber cabling up to 80Km.....
iMcV-LIM Series
Modular iMcV-LIM SNMP-manageable converters deliver a value priced media conversion solution, up to Fast Ethernet speeds. iMcV-LIM series converters are ideal in all premises LAN, fiber distance extension and service provider applications. For example, LAN managers can use these converters to interconnect workgroup switches over fiber optics. Service providers can deploy iMcV-LIM converters back-to-back to provide high-speed data connections to business customers...
iMcV-Gigabit & IE-iMcV-Gigabit
iMcV-PIM
iMcV-PIM TP/FO series modular, SNMP managed converters provide a physical layer conversion between 10Base-T and 10Base-FL signals. iMcV-PIM series converters support multi-mode and single-mode fiber types and popular ST or SC connector types...
iMcV-Switch
iMcV-T1/E1/J1 Repeater
The T1/E1/J1 converters are physical layer Media Converters that convert copper-based circuits to fiber optics. The T1/E1/J1 fiber converters are ideal for extending your 1.544 Mbps T1/J1 and 2.048 Mbps E1 copper-based PBX, router and switch circuits over regular duplex fiber or single-strand fiber optics...
iMcV-T1/E1/J1-LineTerm
The iMcV-T1/E1/J1-LineTerm is an SNMP manageable module that converts copper-based circuits (T1/E1/J1) to a single-mode or multi-mode fiber signal, extending the distance of data transmissions over networks up to 80 km. The iMcV-T1/E1/J1-LineTerm converter is perfect for service providers and enterprise campus networks utilizing T1/E1/J1 copper lines...
IE-iMcV-VDSL2-LANextender
iMcV-WDM
The WDM products are passive, two-channel protocol and speed independent Wave Division Multiplexers which allow two individual wavelengths to share one fiber. Full-Duplex data travels on 1310nm and 1550nm, virtually doubling the capacty of the installed fiber...
iMediaChassis
The iMediaChassis series is an intelligent, managed carrier-grade optical access platform that supports Ethernet,T1/E1, DS3/E3 and WDM networking technologies...
McBasic Series
McPC Series
McPC Series Media Converters are ideal for Fiber-to-the-Desktop applications and for companies with frequent moves and changes to workstation locations. Installing right inside the PC or a workstation, next to an existing NIC card, these unobtrusive units eliminate the need to place Media Converters on top of CPUs and having additional power adaptors and cords around the workspace...
McPC Series
McPC Series Media Converters are ideal for Fiber-to-the-Desktop applications and for companies with frequent moves and changes to workstation locations. Installing right inside the PC or a workstation, next to an existing NIC card, these unobtrusive units eliminate the need to place Media Converters on top of CPUs and having additional power adaptors and cords around the workspace...
MediaChassis & IE-MediaChassis
The MediaChassis and IE-MediaChassis series are ideal solutions for installing iMcV application modules at remote locations or in areas with limited space. For example, deploy these standalone chassis at the customer premises (CPE) or each access point and connect to a multi-slot media conversion platform such as an iMediaChassis located at the central office (CO)...
McLIM, McPIM & McGigabit
Network managers worldwide rely on the MediaConverter series when converting twisted pair cabling to fiber optics. The modular MediaConverter series is the most cost-effective, flexible solution for everyday fiber networking in the LAN, campus network, outside plant and MAN applications...
MiniMc
Designed and manufactured in the USA, the MiniMc series extends 10 Mbps and 100 Mbps twisted pair network segments over regular duplex (up to 40 Km) or single-strand fiber optics (up to 60 Km)...
PD-Switch
Combining flexible copper and fiber interface options, including media conversion, along with port and packet-based traffic prioritization, PD-Switch's rich functionality turns Power over Ethernet (PoE) into extended network rangel...
PoE Giga-MiniMc & PoE+ Giga-MiniMc
PSE-McBasic
A 100 Mbp copper to fiber media converter, the PSE-McBasic media converter provides IEEE 802.3af Power Sourcing (PSE) functionality on the twisted pair port, supplying both data and electric current to devices such as WiFi access points, VoIP phones and IP security cameras...
iMcV-PSE-MidSpan
Connecting and powering small devices at the edge of a wired network infrastructure becomes increasingly important to LANs/MANs as they add Wi-Fi access points, webcams, entry control systems, and other IP devices. Sometimes, the most optimal location for one of these devices is too far from an AC or DC power source. Spending a lot of money to rewire electric cabling isn’t the alternative, nor is moving the location of the access point, or sacrificing it altogether...
SNMP Management Module
Giga-AccessEtherLinX-II
IE-iMcV-T1-Mux/4
iMcV-10G-Converter XFP/XFP
IE-iMcV-E1-Mux/4
iMcV-E1-Mux/4 & IE-iMcV-E1-Mux/4
The iMcV-E1-Mux/4 is a managed modular media converter, installed as a Host/Remote pair, that transports four independent E1 lines over a single or dual fiber optic line. The module is ideal for applications requiring TDM extension, such as remote office PABX connectivity, with optional support for a full bandwidth 10/100BaseT Ethernet connection over the same optical link...
PoE McBasic
PoE and PoE+ Giga-McBasic
