iMcV-FiberLinX-II Optical Ethernet Demarcation Unit
The FiberLinX-II solution connects a host/remote network over fiber optics. Building on the success of the original FiberLinX solution, the FiberLinX-II combines media conversion with an advanced-feature set for network management and troubleshooting, including Extra-Tagging and EtherType control functionality. With the FiberLinX-II, administrators can observe the end-points, and the fiber link between them, as single management entities and not as separate elements. Host management traffic is not visible to the remote or customer network nor is access to the customer network required, guaranteeing end-to-end data integrity.
FiberLinX-II allows for remote configuration and alerts administrators to any potential problems on the long-haul fiber run, provides vital information on link condition and reports data traffic statistics. In addition, it reduces the total cost of network equipment by functioning as a copper-to-fiber media converter, allowing deployment of lower cost copper switches at both ends of the fiber connection. In addition to the FiberLinX's support for Host/Remote environments, the product also has built-in support for the Unified Management Agent (UMA). With UMA, the central location can manage all devices installed in an iMediaChassis with the single IP address of the chassis.
Optional single- or dual-SFP port verisions or all copper (RJ-45) port versions are also available for complete network flexibility. IMC Networks offers a full range of SFPs - for more information, go to the SFP product page.
Download the FTTx Cross-Reference Matrix for a side-by-side comparison.
|
Application Diagram
Features and Specifications
- Supports Extra Tagging (Q-in-Q)
- Provides EtherType control
- Preserves complete end-to-end fiber connection integrity
- Broadcast Storm Protection
- Supports Last Gasp Trap
- Supports the Unified Management Agent (UMA)
- Bi-directional bandwidth control
- Read/write IEEE 802.1Q VLAN-tags
- QoS: IEEE 802.1p-based packet prioritization (2 queues [high/low] with 8 levels of priority)
- Layer 2 packet switching, store and forward operation
- AutoCross for MDI-II/MDI-X
- Features Auto-Negotiation and Selective Advertising
- Supports Half and Full-Duplex operation
- MTU: Supports over-sized (Jumbo) packets up to 1916 bytes per packet
- Multiple Access Levels: User Assigned Accounts & Access Levels
- SNMP V1 and V2c compatible
- Includes GUI-based iView² software for remote management and upgrades
- Monitors far-end (remote) status without a physical presence or separate connection
- IEEE 802.3x Flow Control
- Includes DHCP and TFTP clients
- Supports Telnet
- Includes loopback test modes (MAC swap)
- Includes LinkLoss and FiberAlert
- Supports the Unified Management Agent (UMA)
- Includes status LEDs
- Connectors: RJ-45, and ST or SC
- Optional support for single or dual SFPs
- Optional all-copper (RJ-45) version
- Shipping Weight: 4 ounces (113 grams)
- Dimensions: standard single-slot chassis module
- Power Consumption: 580mA at 5V
iMcV-FiberLinX-II Documents
Certification
- Declaration of Conformity: iMcV-FiberLinX-II
Post Date: 5/2008
Data Sheet
- iMcV-FiberLinX-II Data Sheet
Post Date: 8/2007
Manuals and Installation Guides
- iMcV-FiberLinX-II Operation Manual
Revision: A0 - Post Date: 8/2007
Release Notes
- Release Notes for Firmware version B0 for iMcV-FiberLinX-II.
Revision: B0 - Post Date: 7/2008 - Release Notes for Firmware version A4 for iMcV-FiberLinX-II.
Revision: A4 - Post Date: 2/2008 - Release Notes for Firmware version A3 for iMcV-FiberLinX-II.
Revision: A3 - Post Date: 12/2007 - Release Notes for Firmware version A2 for iMcV-FiberLinX-II.
Revision: A2 - Post Date: 7/2007
Software Downloads
- iMcV-FiberLinX-II Firmware Version B0
Revision: B0 - Post Date: 7/2008
Standard
| SKU | Description | Power Budget | Distance |
| 856-14010 | iMcV-FiberLinX-II, TX/TX | N/A | N/A |
| 856-14011 | iMcV-FiberLinX-II, TX/FX-MM1300-ST | 2 km | |
| 856-14012 | iMcV-FiberLinX-II, TX/FX-MM1300-SC | 2 km | |
| 856-14015 | iMcV-FiberLinX-II, TX/FX-SM1310/PLUS-ST | 40 km | |
| 856-14016 | iMcV-FiberLinX-II, TX/FX-SM1310/PLUS-SC | 40 km | |
| 856-14017 | iMcV-FiberLinX-II, TX/FX-SM1310/LONG-ST | 70 km | |
| 856-14018 | iMcV-FiberLinX-II, TX/FX-SM1310/LONG-SC | 70 km | |
| 856-14021 | iMcV-FiberLinX-II, TX/FX-SM1550/LONG-SC | 80 km | |
| 856-14500 | iMcV-FiberLinX-II, TX/SFP (requires one SFP/155-ED Module) | N/A | N/A |
| 856-14501 | iMcV-FiberLinX-II, SFP/SFP (requires two SFP/155-ED Modules) | N/A | N/A |
Single Strand
| SKU | Description | Power Budget | Distance |
| 856-14043 | iMcV-FiberLinX-II, TX/SSFX-SM1310-SC (1310xmt/1550rcv) | 20 km | |
| 856-14044 | iMcV-FiberLinX-II, TX/SSFX-SM1550-SC (1550xmt/1310rcv) | 20 km | |
| 856-14045 | iMcV-FiberLinX-II, TX/SSFX-SM1310/PLUS-SC (1310xmt/1550rcv) | 40 km | |
| 856-14046 | iMcV-FiberLinX-II, TX/SSFX-SM1550/PLUS-SC (1550xmt/1310rcv) | 40 km | |
| 856-14047 | iMcV-FiberLinX-II, TX/SSFX-SM1310/LONG-SC (1310xmt/1550rcv) | 60 km | |
| 856-14048 | iMcV-FiberLinX-II, TX/SSFX-SM1550/LONG-SC (1550xmt/1310rcv) | 60 km |